# \[ANNOUNCE\] Gluon 2015.1

**URL:** <https://forum.freifunk.net/t/announce-gluon-2015-1/5204>\
**Category:** Gluon\
**Created:** [16. Mai 2015 um 21:52 UTC](https://forum.freifunk.net/t/announce-gluon-2015-1/5204 "2015-05-16T21:52:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![stefan](https://forum.freifunk.net/user_avatar/forum.freifunk.net/stefan/32/22670_2.png) [@stefan](https://forum.freifunk.net/u/stefan)\
**Post date:** [16. Mai 2015 um 21:52 UTC](https://forum.freifunk.net/t/announce-gluon-2015-1/5204/1 "2015-05-16T21:52:04Z")

</div>

Da ich es hier noch nicht gesehen habe poste ich es mal von der Gluon Mailingliste:

Hi,  
in nice atmosphere at the Wireless Community Weekend in Berlin, we’ve  
decided to finally release Gluon 2015.1 😃

Amongst the most important changes are:

- Many, many new supported devices (including official support for some  
non-ar71xx-generic targets)
- Fully translated config and export mode in English and German
- Mesh-on-LAN
- Important bugfixes:
  - Fixed IPv6 issues on the WAN port (sometimes breaking the mesh VPN  
on IPv6-only lines)
  - Sometimes nodes would factory reset instead of simply rebooting to  
config mode when the reset button was pressed for more than 5 seconds

We also thank our many contributors, who helped making Gluon what it is  
today - either by sending patches and pull requests, or just by giving  
us valuable input for our discussions.

As always, the complete release notes can be found at [1].

Regards,  
NeoRaider

[1] [Gluon 2015.1 — Gluon 2015.1 documentation](http://gluon.readthedocs.org/en/v2015.1/releases/v2015.1.html)

---

<div class="post-metadata">

**Author:** ![JoBu](https://forum.freifunk.net/user_avatar/forum.freifunk.net/jobu/32/1011_2.png) [@JoBu](https://forum.freifunk.net/u/JoBu)\
**Post date:** [16. Mai 2015 um 22:42 UTC](https://forum.freifunk.net/t/announce-gluon-2015-1/5204/2 "2015-05-16T22:42:21Z")

</div>

> [@stefan](#):
>
> Mesh-on-LAN

Ich dachte, dass das alles [zusammengefasst](https://github.com/freifunk-gluon/gluon/issues/284) und in 2015.2 verschoben wurde, aber je eher desto besser 😊

---

<div class="post-metadata">

**Author:** ![Marco](https://forum.freifunk.net/letter_avatar_proxy/v4/letter/m/a698b9/32.png) [@Marco](https://forum.freifunk.net/u/Marco)\
**Post date:** [17. Mai 2015 um 13:08 UTC](https://forum.freifunk.net/t/announce-gluon-2015-1/5204/3 "2015-05-17T13:08:19Z")

</div>

Mesh-On-LAN bedeutet, dass man nicht mehr die Router per Switch über die WAN-Anschlüsse verbinden muss, sondern alle Router an die LAN Ports des Routers klemmen kann der VPN macht? Das wäre schon ganz praktisch.

---

<div class="post-metadata">

**Author:** ![JoBu](https://forum.freifunk.net/user_avatar/forum.freifunk.net/jobu/32/1011_2.png) [@JoBu](https://forum.freifunk.net/u/JoBu)\
**Post date:** [17. Mai 2015 um 18:02 UTC](https://forum.freifunk.net/t/announce-gluon-2015-1/5204/4 "2015-05-17T18:02:47Z")

</div>

Genau so ist es. Ich hatte es auf Github so verstanden, dass das erst dann kommt, wenn alle Ports frei konfigurierbar sind.