Das ist ganz einfach (wenn man die Bildunsgvorschrift kennt).
Ein Beispiel.
Aus dem Graph die MAC Adresse eines Nodes besorgen:
ffwaf-baui1 / e8:94:f6:62:56:94
+02h auf das Most Significant Byte addieren, ergibt
ea:94:f6:62:56:94
Bildungsvorschrift: Prefix + erster Teil MAC + fffe + zweiter Teil MAC
2a03:2260:115:: + ea:94:f6 + fffe + 62:56:94
ergibt
2a03:2260:115::ea94:f6ff:fe62:5694
Test:
# ping 2a03:2260:115::ea94:f6ff:fe62:5694
PING 2a03:2260:115::ea94:f6ff:fe62:5694 (2a03:2260:115:0:ea94:f6ff:fe62:5694): 56 data bytes
64 bytes from 2a03:2260:115:0:ea94:f6ff:fe62:5694: seq=0 ttl=64 time=83.307 ms
64 bytes from 2a03:2260:115:0:ea94:f6ff:fe62:5694: seq=1 ttl=64 time=62.205 ms
64 bytes from 2a03:2260:115:0:ea94:f6ff:fe62:5694: seq=2 ttl=64 time=38.799 ms
--- 2a03:2260:115::ea94:f6ff:fe62:5694 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 38.799/61.437/83.307 ms
$ links -dump http://[2a03:2260:115::ea94:f6ff:fe62:5694]/cgi-bin/status
ffwaf-baui1
Model: TP-Link TL-WR841N/ND v9
Firmware release: 2014.4-4.1exp20150206
17:29:21 up 2 days, 2:59, load average: 0.13, 0.16, 0.28
6: br-client: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether e8:94:f6:62:56:94 brd ff:ff:ff:ff:ff:ff
inet6 fd68:e2ea:a53:0:ea94:f6ff:fe62:5694/64 scope global dynamic
valid_lft 86371sec preferred_lft 14371sec
inet6 2a03:2260:115:0:ea94:f6ff:fe62:5694/64 scope global dynamic
valid_lft 86371sec preferred_lft 14371sec
inet6 fe80::ea94:f6ff:fe62:5694/64 scope link
valid_lft forever preferred_lft forever
total used free shared buffers
Mem: 28860 25868 2992 0 1864
-/+ buffers: 24004 4856
Swap: 0 0 0
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 2304 2304 0 100% /rom
/dev/mtdblock3 640 236 404 37% /overlay
Neighbours
wlan0
Joined IBSS 02:d1:11:37:fc:38 (on wlan0)
SSID: 02:d1:11:37:fc:38
freq: 2412
Station ea:e1:28:bb:45:e6 (on wlan0)
inactive time: 10 ms
rx bytes: 2953569707
rx packets: 17269374
tx bytes: 264361656
tx packets: 1494896
tx retries: 266539
tx failed: 9
signal: -55 [-62, -56] dBm
signal avg: -55 [-62, -56] dBm
tx bitrate: 240.0 MBit/s MCS 13 40MHz short GI
rx bitrate: 270.0 MBit/s MCS 15 40MHz
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
VPN status
fastd running for 183532.162 seconds
There are 3 peers configured, of which 0 are connected:
mesh_vpn_backbone_peer_fusselkater: not connected
mesh_vpn_backbone_peer_fanlin: not connected
mesh_vpn_backbone_peer_commander1024: not connected