# How to open CPE 510/210 stap by stap

**URL:** <https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895>\
**Category:** Hardware\
**Created:** [6. August 2015 um 05:52 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895 "2015-08-06T05:52:31Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![mahadiinfo](https://forum.freifunk.net/letter_avatar_proxy/v4/letter/m/7ba0ec/32.png) [@mahadiinfo](https://forum.freifunk.net/u/mahadiinfo)\
**Post date:** [6. August 2015 um 05:52 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/1 "2015-08-06T05:52:31Z")

</div>

Dear Sir,  
I have two CPE 210, I need ripper this device how to cover open step by step, I did not find screw or lock thice device. any video clip have CPE 210 cover open step by step

---

<div class="post-metadata">

**Author:** ![SenorKaffee](https://forum.freifunk.net/user_avatar/forum.freifunk.net/senorkaffee/32/697_2.png) [@SenorKaffee](https://forum.freifunk.net/u/SenorKaffee)\
**Post date:** [6. August 2015 um 06:31 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/2 "2015-08-06T06:31:36Z")

</div>

I remember it being only one screw - @adorfer uses them a lot, he should know this.

---

<div class="post-metadata">

**Author:** ![DL3DCF](https://forum.freifunk.net/user_avatar/forum.freifunk.net/dl3dcf/32/3259_2.png) [@DL3DCF](https://forum.freifunk.net/u/DL3DCF)\
**Post date:** [6. August 2015 um 08:24 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/3 "2015-08-06T08:24:37Z")

</div>

Here is a youtube video.  
Looks like there is no screw at all.

[![]( " - YouTube") ](https://www.youtube.com/watch?v=YgB5U4lxcQQ)

---

<div class="post-metadata">

**Author:** ![anon76216146](https://forum.freifunk.net/letter_avatar_proxy/v4/letter/a/a88e4f/32.png) [@anon76216146](https://forum.freifunk.net/u/anon76216146)\
**Post date:** [6. August 2015 um 08:35 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/4 "2015-08-06T08:35:30Z")

</div>

you have to use a knife to uncover the screws

[https://forum.freifunk.net/uploads/default/2167/5409e2fec3f0bc99.jpg](https://forum.freifunk.net/uploads/default/2167/5409e2fec3f0bc99.jpg)

---

<div class="post-metadata">

**Author:** ![jim](https://forum.freifunk.net/letter_avatar_proxy/v4/letter/j/ac91a4/32.png) [@jim](https://forum.freifunk.net/u/jim)\
**Post date:** [6. August 2015 um 20:53 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/5 "2015-08-06T20:53:46Z")

</div>

nicht empfehlen kann ich die methode:  
cpe aufrecht aus 10cm und mehr runterfallen lassen 😄

im ernst passt auf das euch das nicht passiert die schraubenhalterungen sind sehr mau verankert und brechen quasie sofort aus und das board rauscht nach unten raus.

---

<div class="post-metadata">

**Author:** ![mahadiinfo](https://forum.freifunk.net/letter_avatar_proxy/v4/letter/m/7ba0ec/32.png) [@mahadiinfo](https://forum.freifunk.net/u/mahadiinfo)\
**Post date:** [8. August 2015 um 10:57 UTC](https://forum.freifunk.net/t/how-to-open-cpe-510-210-stap-by-stap/6895/6 "2015-08-08T10:57:21Z")

</div>

Dear Sir,  
Thanks for send me mail. Sir I try but not open. sir how to performance this product, how to meter cover surface around or aria. how many height set this product. please help as soon as possible. Best Regards

Mahadi