LAN-Ports als WAN konfigurieren

collimas · 28. Februar 2016 um 15:55

Hallo, gibt es in der aktuellen 2016.1 ein Paket, welches eine einfache Konfigurationsänderung der LAN-Ports als WAN-.Anschluss bereitstellt?

PetaByteBoy · 29. Februar 2016 um 12:20

Nein gibt es nicht
Kannst du per SSH+uci machen

rubo77 · 13. April 2018 um 05:51

Patches Welcome:

github.com/freifunk-gluon/gluon

package to set wan on all ports

opened 07:09PM - 05 Jul 17 UTC

rubo77

0. type: enhancement 0. type: feature-accepted

If acceptable, I would build an option into the Config mode, that sets all ports… to WAN, so it doesn't matter any more on which port you connect the node with your internet. In most places nobody needs the LAN ports to get direct Freifunk via LAN, but the most asked question I get is "On which port do I have to connect"? Also this is a commmon mistake that new users make, to mix up the ports. Sure, if not needed you can already set this setting on the console with: ``` uci set network.client.ifname=bat0 uci set network.wan.ifname='eth0 eth1' uci commit network ``` *Source: https://wiki.freifunk.net/Konsole#WAN_auf_allen_Netzwerkports*