Hallo,
einige Nodes (v.A: in Mettmann) sind seit dem Upgrade auf die neue Beta-Firmware 2016.1.6 nicht wieder online gegangen. Bis geklärt ist, wo genau die Ursache ist, habe ich die Beta-Firmware wieder zu Experimental erklärt.
Könnte jemand sich mal vor Ort einloggen und die Ausgabe von logread posten? @Lutz
Viele Grüße,
Benedikt
Komme gerade zurück. Leider habe ich niemanden angetroffen, um direkt an die Router zu kommen. Die senden zwar die SSID, der Client bekommt aber kein IP. Ich bleibe dran.
Übrigens poppte die Meldung über neue Nachricht im Forum heute erst auf.
Auch keine IPv6-Adresse? Die sollte es eigentlich immer geben, wenn der Router läuft. IPv4 geht nur mit funktionierendem fastd-Tunnel.
Ich hatte es über IPv6 probiert …
Muss ich wohl bis Dienstag abwarten.
Oh, dann läuft da wirklich was ziemlich schief. Kann man unter MacOS X per SSH auf link-local-Adressen zugreifen?
Falls ja: per ping6 -I eth0 ff02::2 herausfinden, welche IP der Router hat (falls er denn noch antwortet) und dann per ssh root@$adresse%eth0 einloggen. Könnte aber gut sein, dass das auch nicht mehr tut.
Bevor ich einenn der toten Nodes aufsuche, noch eine AUffäligkeit.
logread von diesem [WR841][1] (Firmware 201609282211 / gluon-v2016.1-86-gee597c6):
Mon Oct 3 14:37:41 2016 daemon.info fastd[1689]: resolving host
fastd2.ffnef-met.ffnef.de' for pe er <mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de>... Mon Oct 3 14:37:41 2016 daemon.info fastd[1689]: resolving hostfastd2.ffnef-met.ffnef.de’ failed
: Name or service not known
Mon Oct 3 14:37:58 2016 daemon.info fastd[1689]: resolving hostfastd1.ffnef-met.ffnef.de' for pe er <mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de>... Mon Oct 3 14:37:58 2016 daemon.info fastd[1689]: resolving hostfastd1.ffnef-met.ffnef.de’ failed
: Name or service not known
Mon Oct 3 14:37:59 2016 daemon.info fastd[1689]: resolving hostfastd3.ffnef-met.ffnef.de' for pe er <mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de>... Mon Oct 3 14:37:59 2016 daemon.info fastd[1689]: resolving hostfastd3.ffnef-met.ffnef.de’ failed
: Name or service not known
Mon Oct 3 14:38:00 2016 daemon.info fastd[1689]: resolving hostfastd2.ffnef-met.ffnef.de' for pe er <mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de>... Mon Oct 3 14:38:00 2016 daemon.info fastd[1689]: resolving hostfastd2.ffnef-met.ffnef.de’ failed
: Name or service not known
Mon Oct 3 14:38:01 2016 daemon.info fastd[1689]: resolving hostfastd4.ffnef-met.ffnef.de' for pe er <mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de>... Mon Oct 3 14:38:01 2016 daemon.info fastd[1689]: resolving hostfastd4.ffnef-met.ffnef.de’ failed
: Name or service not known
Hat keinen Uplink, funktioniert aber einwandfrei.
[1]: https://met.karte.neanderfunk.de/#!v:m;n:14cc20311eb2
Bei den Routern leuchtet lediglich PWR. Nach dem Neustart ist der Router kurze Zeit verfügbar, auch sichtbar in der Map: https://met.karte.neanderfunk.de/#!v:m;n:647002cd7f98
Geht aber schnell wieder off zurück (nur PWR).
Einen Router habe ich jetzt hier. Auch über LAN nicht ansprechbar. Der Router versucht einige Male hoch zu kommen, für einige Sekunden leuchten PWR, SYS, WLAN, geht aber immer wieder auf PWR zurück. Erst nach Reset konnte ich mit 192.168.1.1 zugreifen.
Logread:
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.000000] Linux version 3.18.29 (buildbot@horst) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47335) ) #6 Thu Sep 29 08:27:23 CEST 2016
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] MyLoader: sysp=65203179, boardp=aa222a22, parts=080a2d04
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] SoC: Atheros AR9132 rev 2
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Determined physical RAM map:
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Zone ranges:
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Movable zone start for each node
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Early memory node ranges
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 803742b0, node_mem_map 81000000
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.000000] Kernel command line: board=TL-WR1043ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.000000] Memory: 28324K/32768K available (2574K kernel code, 130K rwdata, 540K rodata, 268K init, 193K bss, 4444K reserved)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] NR_IRQS:51
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.000000] Calibrating delay loop… 265.42 BogoMIPS (lpj=1327104)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.100000] NET: Registered protocol family 16
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.100000] MIPS: machine is TP-LINK TL-WR1043ND
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.390000] Switched to clocksource MIPS
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.390000] NET: Registered protocol family 2
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.400000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.400000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.410000] TCP: Hash tables configured (established 1024 bind 1024)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.420000] TCP: reno registered
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.430000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.430000] NET: Registered protocol family 1
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 0.440000] PCI: CLS 0 bytes, default 32
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.440000] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.460000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.470000] msgmni has been set to 55
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.470000] io scheduler noop registered
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.480000] io scheduler deadline registered (default)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.480000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.490000] console [ttyS0] disabled
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.520000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.530000] console [ttyS0] enabled
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.530000] bootconsole [early0] disabled
Thu Sep 29 08:45:21 2016 kern.warn kernel: [ 0.550000] m25p80 spi0.0: found s25sl064p, expected m25p80
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.550000] m25p80 spi0.0: s25sl064p (8192 Kbytes)
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.560000] 5 tp-link partitions found on MTD device spi0.0
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.560000] Creating 5 MTD partitions on „spi0.0“:
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.570000] 0x000000000000-0x000000020000 : „u-boot“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.570000] 0x000000020000-0x000000140e00 : „kernel“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.580000] 0x000000140e00-0x0000007f0000 : „rootfs“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.590000] mtd: device 2 (rootfs) set to be root filesystem
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.590000] 1 squashfs-split partitions found on MTD device rootfs
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.600000] 0x000000390000-0x0000007f0000 : „rootfs_data“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.600000] 0x0000007f0000-0x000000800000 : „art“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.610000] 0x000000020000-0x0000007f0000 : „firmware“
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 0.620000] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.730000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 0.920000] libphy: rtl8366rb: probed
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.240000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.240000] TCP: cubic registered
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.250000] NET: Registered protocol family 17
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.250000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 1.270000] Bridge firewalling registered
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.270000] 8021q: 802.1Q VLAN Support v1.8
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.280000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 1.290000] Freeing unused kernel memory: 268K (8038d000 - 803d0000)
Thu Sep 29 08:45:21 2016 user.info kernel: [ 2.690000] init: Console is alive
Thu Sep 29 08:45:21 2016 user.info kernel: [ 2.690000] init: - watchdog -
Thu Sep 29 08:45:21 2016 user.info kernel: [ 4.720000] init: - preinit -
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 5.480000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 5.480000] eth0: link up (1000Mbps/Full duplex)
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 5.510000] random: procd urandom read with 8 bits of entropy available
Thu Sep 29 08:45:21 2016 kern.notice kernel: [ 8.910000] jffs2: notice: (346) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Sep 29 08:45:21 2016 user.info kernel: [ 8.930000] mount_root: switching to jffs2 overlay
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 9.210000] eth0: link down
Thu Sep 29 08:45:21 2016 user.info kernel: [ 9.220000] procd: - early -
Thu Sep 29 08:45:21 2016 user.info kernel: [ 9.220000] procd: - watchdog -
Thu Sep 29 08:45:21 2016 user.info kernel: [ 10.000000] procd: - ubus -
Thu Sep 29 08:45:21 2016 user.info kernel: [ 11.020000] procd: - init -
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.240000] NET: Registered protocol family 10
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.250000] tun: Universal TUN/TAP device driver, 1.6
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.260000] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.300000] batman_adv: B.A.T.M.A.N. advanced 2015.1 (compatibility version 15) loaded
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.320000] u32 classifier
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.320000] input device check on
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.320000] Actions configured
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.330000] Mirror/redirect action on
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.400000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.410000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.460000] Ebtables v2.0 registered
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.470000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.490000] nf_conntrack version 0.5.0 (446 buckets, 1784 max)
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.610000] xt_time: kernel timezone is -0000
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: EEPROM regdomain: 0x0
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: EEPROM indicates default country code should be used
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: doing EEPROM country->regdmn map search
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: country maps to regdmn code: 0x3a
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: Country alpha2 being used: US
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.810000] ath: Regpair used: 0x3a
Thu Sep 29 08:45:21 2016 kern.debug kernel: [ 12.830000] ieee80211 phy0: Selected rate control algorithm ‚minstrel_ht‘
Thu Sep 29 08:45:21 2016 kern.info kernel: [ 12.840000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Thu Sep 29 08:45:22 2016 daemon.notice haveged: haveged starting up
Thu Sep 29 08:45:27 2016 daemon.info haveged: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 4.8.3 CV); collect: 128K
Thu Sep 29 08:45:27 2016 daemon.info haveged: haveged: cpu: (); data: 32K (P); inst: 32K (P); idx: 19/40; sz: 32699/67115
Thu Sep 29 08:45:27 2016 daemon.info haveged: haveged: fills: 0, generated: 0
Thu Sep 29 08:45:27 2016 authpriv.info dropbear[889]: Not backgrounding
Thu Sep 29 08:45:28 2016 daemon.info dnsmasq[919]: started, version 2.73 DNS disabled
Thu Sep 29 08:45:28 2016 daemon.info dnsmasq[919]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Sep 29 08:45:28 2016 daemon.info dnsmasq-dhcp[919]: DHCP, IP range 192.168.1.2 – 192.168.1.254, lease time 1h
Thu Sep 29 08:45:28 2016 user.emerg syslog: setting up led USB
Thu Sep 29 08:45:28 2016 user.emerg syslog: Skipping trigger ‚usbdev‘ for led ‚USB‘ due to missing kernel module
Thu Sep 29 08:45:28 2016 user.emerg syslog: setting up led WLAN
Thu Sep 29 08:45:28 2016 daemon.info procd: - init complete -
Thu Sep 29 08:45:29 2016 daemon.warn dnsmasq-dhcp[919]: DHCP packet received on eth0 which has no address
Thu Sep 29 08:45:29 2016 kern.debug kernel: [ 23.990000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep 29 08:45:29 2016 kern.info kernel: [ 23.990000] eth0: link up (1000Mbps/Full duplex)
Thu Sep 29 08:45:29 2016 kern.info kernel: [ 24.000000] device eth0.1 entered promiscuous mode
Thu Sep 29 08:45:29 2016 kern.info kernel: [ 24.000000] device eth0 entered promiscuous mode
Thu Sep 29 08:45:29 2016 kern.info kernel: [ 24.020000] br-setup: port 1(eth0.1) entered forwarding state
Thu Sep 29 08:45:29 2016 kern.info kernel: [ 24.020000] br-setup: port 1(eth0.1) entered forwarding state
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚setup‘ is enabled
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚setup‘ is setting up now
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚setup‘ is now up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚loopback‘ is enabled
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚loopback‘ is setting up now
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚loopback‘ is now up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Bridge ‚br-setup‘ link is up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚setup‘ has link connectivity
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Network device ‚eth0‘ link is up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: VLAN ‚eth0.1‘ link is up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Network device ‚lo‘ link is up
Thu Sep 29 08:45:29 2016 daemon.notice netifd: Interface ‚loopback‘ has link connectivity
Thu Sep 29 08:45:31 2016 daemon.info dnsmasq[1032]: started, version 2.73 cachesize 150
Thu Sep 29 08:45:31 2016 daemon.info dnsmasq[1032]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Thu Sep 29 08:45:31 2016 daemon.info dnsmasq[1032]: using local addresses only for domain lan
Thu Sep 29 08:45:31 2016 daemon.warn dnsmasq[1032]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Sep 29 08:45:31 2016 daemon.info dnsmasq[1032]: read /etc/hosts - 1 addresses
Thu Sep 29 08:45:31 2016 kern.info kernel: [ 26.020000] br-setup: port 1(eth0.1) entered forwarding state
Thu Sep 29 08:45:33 2016 daemon.info dnsmasq-dhcp[919]: DHCPDISCOVER(br-setup) 98:5a:eb:c8:e0:17
Thu Sep 29 08:45:33 2016 daemon.info dnsmasq-dhcp[919]: DHCPOFFER(br-setup) 192.168.1.25 98:5a:eb:c8:e0:17
Thu Sep 29 08:45:34 2016 daemon.info dnsmasq-dhcp[919]: DHCPREQUEST(br-setup) 192.168.1.25 98:5a:eb:c8:e0:17
Thu Sep 29 08:45:34 2016 daemon.info dnsmasq-dhcp[919]: DHCPACK(br-setup) 192.168.1.25 98:5a:eb:c8:e0:17 Lutz-MBP
Thu Sep 29 08:46:09 2016 kern.notice kernel: [ 63.940000] random: nonblocking pool is initialized
Thu Sep 29 08:46:43 2016 authpriv.info dropbear[1098]: Child connection from 192.168.1.25:53436
Thu Sep 29 08:47:22 2016 authpriv.notice dropbear[1098]: Password auth succeeded for ‚root‘ from 192.168.1.25:53436
Sysupgrade auf 201604182326 / gluon-v2016.1-31-gb493e1b lief dann problemlos.
Ausgabe von „uci show“ der Node:
alfred.alfred=alfred
alfred.alfred.batmanif=‚bat0‘
alfred.alfred.start_vis=‚1‘
alfred.alfred.mode=‚slave‘
alfred.alfred.run_facters=‚0‘
alfred.alfred.interface=‚br-client‘
autoupdater.settings=autoupdater
autoupdater.settings.enabled=‚1‘
autoupdater.settings.version_file=‚/lib/gluon/release‘
autoupdater.settings.branch=‚beta‘
autoupdater.experimental=branch
autoupdater.experimental.mirror=‚http://firmware.ffnef-met.ffnef.de/firmware/broken/ffnef-met/sysupgrade‘ ‚http://firmware.ffnef-met.ffnef/firmware/broken/ffnef-met/sysupgrade‘ ‚Freifunk Neanderfunk Firmware Seite‘ ‚http://[2a03:2260:300e:10::733]/firmware/broken/ffnef-met/sysupgrade‘
autoupdater.experimental.good_signatures=‚1‘
autoupdater.experimental.name=‚experimental‘
autoupdater.experimental.pubkey=‚dd6a9d1aefc175f885705691498e904cbda12cc4602316f04816d78026c7c0f0‘ ‚e2f48369e2bd55780908c06f2d10318f2844676c44ec3e70b4a9b8635b2a09d6‘ ‚fb919d4adc69bd404f5093ce6b43badf351f9e642ad458406be986baf6096247‘ ‚2a61930930a240c027f6ca4197203d400b6e4a32f9e92041e5f086907796c9bc‘ ‚d02f8e60fb7a5069556500694ebe512b6017b01e9950476e4cfcf10d5130c296‘ ‚96d644ff1ce07d6f67d9329a0eb9a1548d0d01a3519d17ec1fe9d49da3270bfc‘
autoupdater.beta=branch
autoupdater.beta.mirror=‚http://firmware.ffnef-met.ffnef.de/firmware/beta/ffnef-met/sysupgrade‘ ‚http://firmware.ffnef-met.ffnef/firmware/beta/ffnef-met/sysupgrade‘ ‚Freifunk Neanderfunk Firmware Seite‘ ‚http://[2a03:2260:300e:10::733]/firmware/beta/ffnef-met/sysupgrade‘ ‚http://[2a03:2260:300e:10::733]/firmware/beta/ffnef-met/sysupgrade‘
autoupdater.beta.good_signatures=‚1‘
autoupdater.beta.name=‚beta‘
autoupdater.beta.pubkey=‚dd6a9d1aefc175f885705691498e904cbda12cc4602316f04816d78026c7c0f0‘ ‚e2f48369e2bd55780908c06f2d10318f2844676c44ec3e70b4a9b8635b2a09d6‘ ‚fb919d4adc69bd404f5093ce6b43badf351f9e642ad458406be986baf6096247‘ ‚2a61930930a240c027f6ca4197203d400b6e4a32f9e92041e5f086907796c9bc‘ ‚d02f8e60fb7a5069556500694ebe512b6017b01e9950476e4cfcf10d5130c296‘ ‚96d644ff1ce07d6f67d9329a0eb9a1548d0d01a3519d17ec1fe9d49da3270bfc‘
autoupdater.stable=branch
autoupdater.stable.mirror=‚http://firmware.ffnef-met.ffnef.de/firmware/stable/ffnef-met/sysupgrade‘ ‚http://firmware.ffnef-met.ffnef/firmware/stable/ffnef-met/sysupgrade‘ ‚Freifunk Neanderfunk Firmware Seite‘ ‚http://[2a03:2260:300e:10::733]/firmware/stable/ffnef-met/sysupgrade‘ ‚http://[2a03:2260:300e:10::733]/firmware/stable/ffnef-met/sysupgrade‘
autoupdater.stable.good_signatures=‚2‘
autoupdater.stable.name=‚stable‘
autoupdater.stable.pubkey=‚dd6a9d1aefc175f885705691498e904cbda12cc4602316f04816d78026c7c0f0‘ ‚fb919d4adc69bd404f5093ce6b43badf351f9e642ad458406be986baf6096247‘ ‚2a61930930a240c027f6ca4197203d400b6e4a32f9e92041e5f086907796c9bc‘ ‚d02f8e60fb7a5069556500694ebe512b6017b01e9950476e4cfcf10d5130c296‘ ‚96d644ff1ce07d6f67d9329a0eb9a1548d0d01a3519d17ec1fe9d49da3270bfc‘
autoupdater-wifi-fallback.settings=autoupdater-wifi-fallback
autoupdater-wifi-fallback.settings.enabled=‚1‘
batman-adv.bat0=mesh
batman-adv.bat0.gw_mode=‚client‘
batman-adv.bat0.orig_interval=‚5000‘
batman-adv.bat0.hop_penalty=‚15‘
batman-adv.bat0.multicast_mode=‚0‘
dhcp.@dnsmasq[0]=dnsmasq
dhcp.@dnsmasq[0].domainneeded=‚1‘
dhcp.@dnsmasq[0].filterwin2k=‚0‘
dhcp.@dnsmasq[0].rebind_localhost=‚1‘
dhcp.@dnsmasq[0].local=‚/lan/‘
dhcp.@dnsmasq[0].domain=‚lan‘
dhcp.@dnsmasq[0].expandhosts=‚1‘
dhcp.@dnsmasq[0].nonegcache=‚0‘
dhcp.@dnsmasq[0].authoritative=‚1‘
dhcp.@dnsmasq[0].readethers=‚1‘
dhcp.@dnsmasq[0].leasefile=‚/tmp/dhcp.leases‘
dhcp.@dnsmasq[0].resolvfile=‚/tmp/resolv.conf.auto‘
dhcp.@dnsmasq[0].localservice=‚1‘
dhcp.@dnsmasq[0].boguspriv=‚0‘
dhcp.@dnsmasq[0].localise_queries=‚0‘
dhcp.@dnsmasq[0].rebind_protection=‚0‘
dhcp.lan=dhcp
dhcp.lan.interface=‚lan‘
dhcp.lan.start=‚100‘
dhcp.lan.limit=‚150‘
dhcp.lan.leasetime=‚12h‘
dhcp.wan=dhcp
dhcp.wan.interface=‚wan‘
dhcp.wan.ignore=‚1‘
dhcp.client=dhcp
dhcp.client.ignore=‚1‘
dhcp.client.interface=‚client‘
dropbear.@dropbear[0]=dropbear
dropbear.@dropbear[0].PasswordAuth=‚on‘
dropbear.@dropbear[0].RootPasswordAuth=‚on‘
dropbear.@dropbear[0].Port=‚22‘
fastd.sample_config=fastd
fastd.sample_config.enabled=‚0‘
fastd.sample_config.syslog_level=‚info‘
fastd.sample_config.method=‚salsa2012+umac‘
fastd.sample_config.mode=‚tap‘
fastd.sample_config.interface=‚tap0‘
fastd.sample_config.mtu=‚1426‘
fastd.sample_config.forward=‚0‘
fastd.sample_config.secure_handshakes=‚1‘
fastd.sample_peer=peer
fastd.sample_peer.enabled=‚0‘
fastd.sample_peer.net=‚sample_config‘
fastd.sample_peer.key=‚0000000000000000000000000000000000000000000000000000000000000000‘
fastd.sample_group=peer_group
fastd.sample_group.enabled=‚0‘
fastd.sample_group.net=‚sample_config‘
fastd.mesh_vpn=fastd
fastd.mesh_vpn.mtu=‚1364‘
fastd.mesh_vpn.group=‚gluon-fastd‘
fastd.mesh_vpn.status_socket=‚/var/run/fastd.mesh_vpn.socket‘
fastd.mesh_vpn.packet_mark=‚1‘
fastd.mesh_vpn.syslog_level=‚verbose‘
fastd.mesh_vpn.mode=‚tap‘
fastd.mesh_vpn.secure_handshakes=‚1‘
fastd.mesh_vpn.interface=‚mesh-vpn‘
fastd.mesh_vpn.secret=‚185935f5852e2786db7019a5a2d3bf5879476f4b368eb8542fdc08b73e963c40‘
fastd.mesh_vpn.method=‚salsa2012+umac‘
fastd.mesh_vpn.enabled=‚0‘
fastd.mesh_vpn_backbone=peer_group
fastd.mesh_vpn_backbone.enabled=‚1‘
fastd.mesh_vpn_backbone.peer_limit=‚1‘
fastd.mesh_vpn_backbone.net=‚mesh_vpn‘
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de=peer
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de.enabled=‚1‘
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de.key=‚efd2155bf25585788ae333bd228ec960c4ce6d100dd3c0ad5f08e88adf516059‘
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de.net=‚mesh_vpn‘
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de.remote=‚„fastd1.ffnef-met.ffnef.de“ port 63974‘
fastd.mesh_vpn_backbone_peer_fastd1_ffnef_met_ffnef_de.group=‚mesh_vpn_backbone‘
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de=peer
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de.enabled=‚1‘
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de.key=‚dd43a7d1c3f893ec67f13aca90bb5be2d449e8a83e943869f240b1f99ca7297a‘
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de.net=‚mesh_vpn‘
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de.remote=‚„fastd4.ffnef-met.ffnef.de“ port 63974‘
fastd.mesh_vpn_backbone_peer_fastd4_ffnef_met_ffnef_de.group=‚mesh_vpn_backbone‘
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de=peer
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de.enabled=‚1‘
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de.key=‚0c3131778981c318135e0f552d747c513f0589ac9a214ad75731c8455a442c20‘
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de.net=‚mesh_vpn‘
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de.remote=‚„fastd3.ffnef-met.ffnef.de“ port 63974‘
fastd.mesh_vpn_backbone_peer_fastd3_ffnef_met_ffnef_de.group=‚mesh_vpn_backbone‘
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de=peer
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de.enabled=‚1‘
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de.key=‚65071e80af35865830c5e5014c1279bf7b7bd2bcc06b9f721137ee1f624ce4d4‘
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de.net=‚mesh_vpn‘
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de.remote=‚„fastd2.ffnef-met.ffnef.de“ port 63974‘
fastd.mesh_vpn_backbone_peer_fastd2_ffnef_met_ffnef_de.group=‚mesh_vpn_backbone‘
firewall.@defaults[0]=defaults
firewall.@defaults[0].syn_flood=‚1‘
firewall.@defaults[0].input=‚ACCEPT‘
firewall.@defaults[0].output=‚ACCEPT‘
firewall.@defaults[0].forward=‚REJECT‘
firewall.@zone[0]=zone
firewall.@zone[0].name=‚lan‘
firewall.@zone[0].network=‚lan‘
firewall.@zone[0].input=‚ACCEPT‘
firewall.@zone[0].output=‚ACCEPT‘
firewall.@zone[0].forward=‚ACCEPT‘
firewall.@zone[1]=zone
firewall.@zone[1].name=‚wan‘
firewall.@zone[1].network=‚wan‘ ‚wan6‘
firewall.@zone[1].input=‚REJECT‘
firewall.@zone[1].output=‚ACCEPT‘
firewall.@zone[1].forward=‚REJECT‘
firewall.@zone[1].masq=‚1‘
firewall.@zone[1].mtu_fix=‚1‘
firewall.@zone[1].conntrack=‚1‘
firewall.@forwarding[0]=forwarding
firewall.@forwarding[0].src=‚lan‘
firewall.@forwarding[0].dest=‚wan‘
firewall.@rule[0]=rule
firewall.@rule[0].name=‚Allow-DHCP-Renew‘
firewall.@rule[0].src=‚wan‘
firewall.@rule[0].proto=‚udp‘
firewall.@rule[0].dest_port=‚68‘
firewall.@rule[0].target=‚ACCEPT‘
firewall.@rule[0].family=‚ipv4‘
firewall.@rule[1]=rule
firewall.@rule[1].name=‚Allow-Ping‘
firewall.@rule[1].src=‚wan‘
firewall.@rule[1].proto=‚icmp‘
firewall.@rule[1].icmp_type=‚echo-request‘
firewall.@rule[1].family=‚ipv4‘
firewall.@rule[1].target=‚ACCEPT‘
firewall.@rule[2]=rule
firewall.@rule[2].name=‚Allow-IGMP‘
firewall.@rule[2].src=‚wan‘
firewall.@rule[2].proto=‚igmp‘
firewall.@rule[2].family=‚ipv4‘
firewall.@rule[2].target=‚ACCEPT‘
firewall.@rule[3]=rule
firewall.@rule[3].name=‚Allow-DHCPv6‘
firewall.@rule[3].src=‚wan‘
firewall.@rule[3].proto=‚udp‘
firewall.@rule[3].src_ip=‚fe80::/10‘
firewall.@rule[3].src_port=‚547‘
firewall.@rule[3].dest_ip=‚fe80::/10‘
firewall.@rule[3].dest_port=‚546‘
firewall.@rule[3].family=‚ipv6‘
firewall.@rule[3].target=‚ACCEPT‘
firewall.@rule[4]=rule
firewall.@rule[4].name=‚Allow-MLD‘
firewall.@rule[4].src=‚wan‘
firewall.@rule[4].proto=‚icmp‘
firewall.@rule[4].src_ip=‚fe80::/10‘
firewall.@rule[4].icmp_type=‚130/0‘ ‚131/0‘ ‚132/0‘ ‚143/0‘
firewall.@rule[4].family=‚ipv6‘
firewall.@rule[4].target=‚ACCEPT‘
firewall.@rule[5]=rule
firewall.@rule[5].name=‚Allow-ICMPv6-Input‘
firewall.@rule[5].src=‚wan‘
firewall.@rule[5].proto=‚icmp‘
firewall.@rule[5].icmp_type=‚echo-request‘ ‚echo-reply‘ ‚destination-unreachable‘ ‚packet-too-big‘ ‚time-exceeded‘ ‚bad-header‘ ‚unknown-header-type‘ ‚router-solicitation‘ ‚neighbour-solicitation‘ ‚router-advertisement‘ ‚neighbour-advertisement‘
firewall.@rule[5].limit=‚1000/sec‘
firewall.@rule[5].family=‚ipv6‘
firewall.@rule[5].target=‚ACCEPT‘
firewall.@rule[6]=rule
firewall.@rule[6].name=‚Allow-ICMPv6-Forward‘
firewall.@rule[6].src=‚wan‘
firewall.@rule[6].dest=‚*‘
firewall.@rule[6].proto=‚icmp‘
firewall.@rule[6].icmp_type=‚echo-request‘ ‚echo-reply‘ ‚destination-unreachable‘ ‚packet-too-big‘ ‚time-exceeded‘ ‚bad-header‘ ‚unknown-header-type‘
firewall.@rule[6].limit=‚1000/sec‘
firewall.@rule[6].family=‚ipv6‘
firewall.@rule[6].target=‚ACCEPT‘
firewall.@include[0]=include
firewall.@include[0].path=‚/etc/firewall.user‘
firewall.@rule[7]=rule
firewall.@rule[7].src=‚wan‘
firewall.@rule[7].dest=‚lan‘
firewall.@rule[7].proto=‚esp‘
firewall.@rule[7].target=‚ACCEPT‘
firewall.@rule[8]=rule
firewall.@rule[8].src=‚wan‘
firewall.@rule[8].dest=‚lan‘
firewall.@rule[8].dest_port=‚500‘
firewall.@rule[8].proto=‚udp‘
firewall.@rule[8].target=‚ACCEPT‘
firewall.wan_ssh=rule
firewall.wan_ssh.dest_port=‚22‘
firewall.wan_ssh.src=‚wan‘
firewall.wan_ssh.name=‚wan_ssh‘
firewall.wan_ssh.target=‚ACCEPT‘
firewall.wan_ssh.proto=‚tcp‘
firewall.client_dns=rule
firewall.client_dns.dest_port=‚53‘
firewall.client_dns.src=‚client‘
firewall.client_dns.name=‚client_dns‘
firewall.client_dns.target=‚REJECT‘
firewall.mesh_vpn_dns=include
firewall.mesh_vpn_dns.family=‚ipv4‘
firewall.mesh_vpn_dns.type=‚restore‘
firewall.mesh_vpn_dns.path=‚/lib/gluon/mesh-vpn-fastd/iptables.rules‘
firewall.wan_respondd_reply=rule
firewall.wan_respondd_reply.src_port=‚1001‘
firewall.wan_respondd_reply.src=‚wan‘
firewall.wan_respondd_reply.name=‚wan_respondd_reply‘
firewall.wan_respondd_reply.src_ip=‚fe80::/64‘
firewall.wan_respondd_reply.target=‚ACCEPT‘
firewall.wan_respondd_reply.proto=‚udp‘
firewall.wan_respondd_reply.dest_port=‚32768:61000‘
firewall.wan_respondd=rule
firewall.wan_respondd.dest_port=‚1001‘
firewall.wan_respondd.src=‚wan‘
firewall.wan_respondd.name=‚wan_respondd‘
firewall.wan_respondd.src_ip=‚fe80::/64‘
firewall.wan_respondd.target=‚ACCEPT‘
firewall.wan_respondd.proto=‚udp‘
firewall.client_respondd=rule
firewall.client_respondd.dest_port=‚1001‘
firewall.client_respondd.src=‚client‘
firewall.client_respondd.name=‚client_respondd‘
firewall.client_respondd.src_ip=‚!fe80::/64‘
firewall.client_respondd.target=‚REJECT‘
firewall.client_respondd.proto=‚udp‘
firewall.client=zone
firewall.client.name=‚client‘
firewall.client.input=‚ACCEPT‘
firewall.client.forward=‚REJECT‘
firewall.client.network=‚client‘
firewall.client.output=‚ACCEPT‘
firewall.local_node=zone
firewall.local_node.name=‚local_node‘
firewall.local_node.input=‚ACCEPT‘
firewall.local_node.forward=‚REJECT‘
firewall.local_node.network=‚local_node‘
firewall.local_node.output=‚ACCEPT‘
gluon-node-info.@location[0]=location
gluon-node-info.@location[0].share_location=‚1‘
gluon-node-info.@location[0].latitude=‚51.248294‘
gluon-node-info.@location[0].longitude=‚6.978324‘
gluon-node-info.@owner[0]=owner
gluon-node-info.@owner[0].contact=‚kontakt@freifunk-mettmann.de‘
gluon-node-info.@system[0]=system
gluon-setup-mode.@setup_mode[0]=setup_mode
gluon-setup-mode.@setup_mode[0].configured=‚1‘
gluon-setup-mode.@setup_mode[0].enabled=‚0‘
gluon-wan-dnsmasq.@static[0]=static
luci.main=core
luci.main.lang=‚auto‘
luci.main.mediaurlbase=‚/luci-static/bootstrap‘
luci.main.resourcebase=‚/luci-static/resources‘
luci.flash_keep=extern
luci.flash_keep.uci=‚/etc/config/‘
luci.flash_keep.dropbear=‚/etc/dropbear/‘
luci.flash_keep.openvpn=‚/etc/openvpn/‘
luci.flash_keep.passwd=‚/etc/passwd‘
luci.flash_keep.opkg=‚/etc/opkg.conf‘
luci.flash_keep.firewall=‚/etc/firewall.user‘
luci.flash_keep.uploads=‚/lib/uci/upload/‘
luci.languages=internal
luci.languages.de=‚Deutsch (German)‘
luci.languages.en=‚English‘
luci.languages.fr=‚Français (French)‘
luci.sauth=internal
luci.sauth.sessionpath=‚/tmp/luci-sessions‘
luci.sauth.sessiontime=‚3600‘
luci.ccache=internal
luci.ccache.enable=‚1‘
luci.themes=internal
luci.themes.Gluon=‚/luci-static/gluon‘
network.loopback=interface
network.loopback.ifname=‚lo‘
network.loopback.proto=‚static‘
network.loopback.ipaddr=‚127.0.0.1‘
network.loopback.netmask=‚255.0.0.0‘
network.globals=globals
network.globals.ula_prefix=‚fd5d:98c6:9ae2::/48‘
network.wan6=interface
network.wan6.proto=‚dhcpv6‘
network.wan6.sourcefilter=‚0‘
network.wan6.ifname=‚br-wan‘
network.wan6.ip6table=‚1‘
network.wan6.peerdns=‚0‘
network.@switch[0]=switch
network.@switch[0].name=‚switch0‘
network.@switch[0].reset=‚1‘
network.@switch[0].enable_vlan=‚1‘
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=‚switch0‘
network.@switch_vlan[0].vlan=‚1‘
network.@switch_vlan[0].ports=‚0 1 2 3 4‘
network.wan=interface
network.wan.igmp_snooping=‚0‘
network.wan.ifname=‚eth1‘
network.wan.auto=‚1‘
network.wan.peerdns=‚0‘
network.wan.type=‚bridge‘
network.wan.proto=‚dhcp‘
network.wan.macaddr=‚16:cd:20:31:1e:b2‘
network.wan6_lookup=rule6
network.wan6_lookup.mark=‚0x01/0x01‘
network.wan6_lookup.lookup=‚1‘
network.wan6_unreachable=route6
network.wan6_unreachable.type=‚unreachable‘
network.wan6_unreachable.table=‚1‘
network.wan6_unreachable.target=‚::/0‘
network.wan6_unreachable.metric=‚65535‘
network.wan6_unreachable.gateway=‚::‘
network.wan6_unreachable.interface=‚loopback‘
network.client=interface
network.client.type=‚bridge‘
network.client.macaddr=‚14:cc:20:31:1e:b2‘
network.client.ifname=‚bat0‘
network.client.proto=‚dhcpv6‘
network.client.reqprefix=‚no‘
network.client.igmp_snooping=‚0‘
network.client.peerdns=‚1‘
network.client.sourcefilter=‚0‘
network.mesh_wan=interface
network.mesh_wan.ifname=‚br-wan‘
network.mesh_wan.mesh=‚bat0‘
network.mesh_wan.proto=‚batadv‘
network.mesh_wan.auto=‚1‘
network.mesh_lan=interface
network.mesh_lan.ifname=‚eth0‘
network.mesh_lan.auto=‚1‘
network.mesh_lan.macaddr=‚16:cd:21:31:1e:b2‘
network.mesh_lan.mesh=‚bat0‘
network.mesh_lan.proto=‚batadv‘
network.mesh_vpn=interface
network.mesh_vpn.ifname=‚mesh-vpn‘
network.mesh_vpn.mesh_no_rebroadcast=‚1‘
network.mesh_vpn.macaddr=‚16:d0:20:31:1e:b2‘
network.mesh_vpn.mesh=‚bat0‘
network.mesh_vpn.proto=‚batadv‘
network.bat0=interface
network.bat0.ifname=‚bat0‘
network.bat0.macaddr=‚14:cc:20:31:1e:b2‘
network.bat0.proto=‚none‘
network.mesh_radio0=interface
network.mesh_radio0.mesh=‚bat0‘
network.mesh_radio0.proto=‚batadv‘
network.mesh_radio0.mtu=‚1532‘
network.local_node_dev=device
network.local_node_dev.macaddr=‚10:80:f4:66:82:9f‘
network.local_node_dev.ifname=‚br-client‘
network.local_node_dev.name=‚local-node‘
network.local_node_dev.type=‚macvlan‘
network.local_node=interface
network.local_node.ifname=‚local-node‘
network.local_node.ipaddr=‚10.1.192.255‘
network.local_node.ip6addr=‚2a03:2260:300e:10::ffff/128‘
network.local_node.netmask=‚255.255.240.0‘
network.local_node.proto=‚static‘
network.local_node_route6=route6
network.local_node_route6.target=‚2a03:2260:300e:0010::/64‘
network.local_node_route6.gateway=‚::‘
network.local_node_route6.interface=‚client‘
network.fallback=interface
network.fallback.sourcefilter=‚0‘
network.fallback.proto=‚dhcpv6‘
network.fallback.peerdns=‚1‘
simple-tc.example=interface
simple-tc.example.enabled=‚0‘
simple-tc.example.ifname=‚eth0‘
simple-tc.example.limit_egress=‚1000‘
simple-tc.example.limit_ingress=‚5000‘
simple-tc.mesh_vpn=interface
simple-tc.mesh_vpn.enabled=‚0‘
simple-tc.mesh_vpn.ifname=‚mesh-vpn‘
simple-tc.mesh_vpn.limit_ingress=‚3000‘
simple-tc.mesh_vpn.limit_egress=‚200‘
system.@system[0]=system
system.@system[0].timezone=‚CET-1CEST,M3.5.0,M10.5.0/3‘
system.@system[0].hostname=‚ME-Test-WR841N‘
system.ntp=timeserver
system.ntp.enabled=‚1‘
system.ntp.enable_server=‚0‘
system.ntp.server=‚ntp.ffnef.de‘ ‚1.freifunk.pool.ntp.org‘ ‚2.freifunk.pool.ntp.org‘ ‚3.freifunk.pool.ntp.org‘ ‚0.freifunk.pool.ntp.org‘
system.led_wan=led
system.led_wan.name=‚WAN‘
system.led_wan.sysfs=‚tp-link:green:wan‘
system.led_wan.trigger=‚netdev‘
system.led_wan.dev=‚eth1‘
system.led_wan.mode=‚link tx rx‘
system.led_lan1=led
system.led_lan1.name=‚LAN1‘
system.led_lan1.sysfs=‚tp-link:green:lan1‘
system.led_lan1.trigger=‚switch0‘
system.led_lan1.port_mask=‚0x10‘
system.led_lan2=led
system.led_lan2.name=‚LAN2‘
system.led_lan2.sysfs=‚tp-link:green:lan2‘
system.led_lan2.trigger=‚switch0‘
system.led_lan2.port_mask=‚0x08‘
system.led_lan3=led
system.led_lan3.name=‚LAN3‘
system.led_lan3.sysfs=‚tp-link:green:lan3‘
system.led_lan3.trigger=‚switch0‘
system.led_lan3.port_mask=‚0x04‘
system.led_lan4=led
system.led_lan4.name=‚LAN4‘
system.led_lan4.sysfs=‚tp-link:green:lan4‘
system.led_lan4.trigger=‚switch0‘
system.led_lan4.port_mask=‚0x02‘
system.led_wlan=led
system.led_wlan.name=‚WLAN‘
system.led_wlan.sysfs=‚tp-link:green:wlan‘
system.led_wlan.trigger=‚phy0tpt‘
ucitrack.@network[0]=network
ucitrack.@network[0].init=‚network‘
ucitrack.@network[0].affects=‚dhcp‘ ‚radvd‘
ucitrack.@wireless[0]=wireless
ucitrack.@wireless[0].affects=‚network‘
ucitrack.@firewall[0]=firewall
ucitrack.@firewall[0].init=‚firewall‘
ucitrack.@firewall[0].affects=‚luci-splash‘ ‚qos‘ ‚miniupnpd‘
ucitrack.@olsr[0]=olsr
ucitrack.@olsr[0].init=‚olsrd‘
ucitrack.@dhcp[0]=dhcp
ucitrack.@dhcp[0].init=‚dnsmasq‘
ucitrack.@dhcp[0].affects=‚odhcpd‘
ucitrack.@odhcpd[0]=odhcpd
ucitrack.@odhcpd[0].init=‚odhcpd‘
ucitrack.@dropbear[0]=dropbear
ucitrack.@dropbear[0].init=‚dropbear‘
ucitrack.@httpd[0]=httpd
ucitrack.@httpd[0].init=‚httpd‘
ucitrack.@fstab[0]=fstab
ucitrack.@fstab[0].init=‚fstab‘
ucitrack.@qos[0]=qos
ucitrack.@qos[0].init=‚qos‘
ucitrack.@system[0]=system
ucitrack.@system[0].init=‚led‘
ucitrack.@system[0].affects=‚luci_statistics‘
ucitrack.@luci_splash[0]=luci_splash
ucitrack.@luci_splash[0].init=‚luci_splash‘
ucitrack.@upnpd[0]=upnpd
ucitrack.@upnpd[0].init=‚miniupnpd‘
ucitrack.@ntpclient[0]=ntpclient
ucitrack.@ntpclient[0].init=‚ntpclient‘
ucitrack.@samba[0]=samba
ucitrack.@samba[0].init=‚samba‘
ucitrack.@tinyproxy[0]=tinyproxy
ucitrack.@tinyproxy[0].init=‚tinyproxy‘
ucitrack.@6relayd[0]=6relayd
ucitrack.@6relayd[0].init=‚6relayd‘
uhttpd.main=uhttpd
uhttpd.main.redirect_https=‚1‘
uhttpd.main.rfc1918_filter=‚1‘
uhttpd.main.max_connections=‚100‘
uhttpd.main.cert=‚/etc/uhttpd.crt‘
uhttpd.main.key=‚/etc/uhttpd.key‘
uhttpd.main.cgi_prefix=‚/cgi-bin‘
uhttpd.main.script_timeout=‚60‘
uhttpd.main.network_timeout=‚30‘
uhttpd.main.http_keepalive=‚20‘
uhttpd.main.tcp_keepalive=‚1‘
uhttpd.main.home=‚/lib/gluon/status-page/www‘
uhttpd.main.max_requests=‚32‘
uhttpd.main.listen_http=‚0.0.0.0:80‘ ‚[::]:80‘
uhttpd.px5g=cert
uhttpd.px5g.days=‚730‘
uhttpd.px5g.bits=‚1024‘
uhttpd.px5g.country=‚ZZ‘
uhttpd.px5g.state=‚Somewhere‘
uhttpd.px5g.location=‚Uknown‘
uhttpd.px5g.commonname=‚OpenWrt‘
wireless.radio0=wifi-device
wireless.radio0.type=‚mac80211‘
wireless.radio0.hwmode=‚11g‘
wireless.radio0.path=‚platform/qca953x_wmac‘
wireless.radio0.channel=‚13‘
wireless.radio0.country=‚DE‘
wireless.radio0.txpower=‚20‘
wireless.radio0.htmode=‚HT20‘
wireless.client_radio0=wifi-iface
wireless.client_radio0.ifname=‚client0‘
wireless.client_radio0.network=‚client‘
wireless.client_radio0.disabled=‚0‘
wireless.client_radio0.device=‚radio0‘
wireless.client_radio0.mode=‚ap‘
wireless.client_radio0.macaddr=‚16:ce:21:31:1e:b2‘
wireless.client_radio0.ssid=‚Freifunk‘
wireless.mesh_radio0=wifi-iface
wireless.mesh_radio0.ifname=‚mesh0‘
wireless.mesh_radio0.network=‚mesh_radio0‘
wireless.mesh_radio0.device=‚radio0‘
wireless.mesh_radio0.mesh_fwding=‚0‘
wireless.mesh_radio0.mesh_id=‚ffnef-met-mesh‘
wireless.mesh_radio0.mcast_rate=‚6000‘
wireless.mesh_radio0.mode=‚mesh‘
wireless.mesh_radio0.disabled=‚0‘
wireless.mesh_radio0.macaddr=‚16:d1:21:31:1e:b2‘