Flashing the current Gluon master on a UBNT UniFi AP AC Mesh results in a broken… WiFi interface.
`iw dev` results in `nl80211 not found.`
## logread
```
BusyBox v1.25.1 () built-in shell (ash)
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___| lede-project.org
\ \ DE /
\ LE \ / -----------------------------------------------------------
\ DE \ / Reboot (17.01-SNAPSHOT, r3597+52-7f3dab2fc3)
\________\/ -----------------------------------------------------------
root@64xxx-f09fc2dcc4c5:~# logread
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.000000] Linux version 4.4.93 (hexa@build.ffda.io) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3581+44-6b6578feec) ) #0 Wed Nov 22 00:24:53 2017
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] MyLoader: sysp=1bb19371, boardp=75533157, parts=5317f955
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] bootconsole [early0] enabled
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Determined physical RAM map:
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] memory: 08000000 @ 00000000 (usable)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd
Tue Jan 2 01:51:54 2018 kern.warn kernel: [ 0.000000] No valid device tree found, continuing without
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Zone ranges:
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Movable zone start for each node
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Early memory node ranges
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 32768
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 804344d0, node_mem_map 81000000
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] Normal zone: 256 pages used for memmap
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
Tue Jan 2 01:51:54 2018 kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Tue Jan 2 01:51:54 2018 kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.000000] Kernel command line: board=UBNT-UF-AC-LITE mtdparts=spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Memory: 124944K/131072K available (3103K kernel code, 165K rwdata, 780K rodata, 296K init, 205K bss, 6128K reserved, 0K cma-reserved)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] NR_IRQS:51
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.008206] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.071016] pid_max: default: 32768 minimum: 301
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.076382] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.083367] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.096359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.106781] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.115299] NET: Registered protocol family 16
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.123484] MIPS: machine is Ubiquiti UniFi-AC-LITE
Tue Jan 2 01:51:54 2018 kern.warn kernel: [ 0.345124] registering PCI controller with io_map_base unset
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.375381] PCI host bridge to bus 0000:00
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.379708] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.386996] pci_bus 0000:00: root bus resource [io 0x0001]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.392898] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.400061] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.408449] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
Tue Jan 2 01:51:54 2018 kern.err kernel: [ 0.408475] pci 0000:00:00.0: invalid calibration data
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.413917] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.413969] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.414031] pci 0000:00:00.0: supports D1
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.414044] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.414549] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.414585] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.422305] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.429952] pci 0000:00:00.0: using irq 40 for pin 1
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.437086] clocksource: Switched to clocksource MIPS
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.445285] NET: Registered protocol family 2
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.451457] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.458855] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.465554] TCP: Hash tables configured (established 1024 bind 1024)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.472428] UDP hash table entries: 256 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.478618] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.485699] NET: Registered protocol family 1
Tue Jan 2 01:51:54 2018 kern.debug kernel: [ 0.490435] PCI: CLS 0 bytes, default 32
Tue Jan 2 01:51:54 2018 kern.warn kernel: [ 0.502170] Crashlog allocated RAM at address 0x3f00000
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.574361] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.580570] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.602000] io scheduler noop registered
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.606140] io scheduler deadline registered (default)
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.612266] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.626490] console [ttyS0] disabled
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.650352] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.659445] console [ttyS0] enabled
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.666987] bootconsole [early0] disabled
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.689924] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.695192] 7 cmdlinepart partitions found on MTD device spi0.0
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.701336] Creating 7 MTD partitions on "spi0.0":
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.706293] 0x000000000000-0x000000060000 : "u-boot"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.715593] 0x000000060000-0x000000070000 : "u-boot-env"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.724940] 0x000000070000-0x000000800000 : "firmware"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.747404] 2 uimage-fw partitions found on MTD device firmware
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.753545] 0x000000070000-0x0000001c0000 : "kernel"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.761858] 0x0000001c0000-0x000000800000 : "rootfs"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.770947] mtd: device 4 (rootfs) set to be root filesystem
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.776827] 1 squashfs-split partitions found on MTD device rootfs
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.783273] 0x000000480000-0x000000800000 : "rootfs_data"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.792635] 0x000000800000-0x000000f90000 : "ubnt-airos"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.801949] 0x000000f90000-0x000000fb0000 : "bs"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.810482] 0x000000fb0000-0x000000ff0000 : "cfg"
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 0.819178] 0x000000ff0000-0x000001000000 : "EEPROM"
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 0.842517] libphy: ag71xx_mdio: probed
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.508629] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Atheros 8031/8033 ethernet]
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.520866] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.533053] NET: Registered protocol family 10
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.548229] NET: Registered protocol family 17
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.553561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.566862] 8021q: 802.1Q VLAN Support v1.8
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.593420] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 1.602422] Freeing unused kernel memory: 296K
Tue Jan 2 01:51:54 2018 user.info kernel: [ 2.476816] init: Console is alive
Tue Jan 2 01:51:54 2018 user.info kernel: [ 2.480769] init: - watchdog -
Tue Jan 2 01:51:54 2018 user.info kernel: [ 2.495092] init: - preinit -
Tue Jan 2 01:51:54 2018 kern.info kernel: [ 3.462442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 3.489743] random: procd: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
Tue Jan 2 01:51:54 2018 user.notice kernel: [ 5.745242] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
Tue Jan 2 01:51:54 2018 user.warn kernel: [ 5.757845] urandom-seed: Seed file not found (/etc/urandom.seed)
Tue Jan 2 01:51:54 2018 user.info kernel: [ 5.936985] procd: - early -
Tue Jan 2 01:51:54 2018 user.info kernel: [ 5.941046] procd: - watchdog -
Tue Jan 2 01:51:54 2018 user.info kernel: [ 6.622693] procd: - watchdog -
Tue Jan 2 01:51:54 2018 user.info kernel: [ 6.626367] procd: - ubus -
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.697351] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.707162] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.716462] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.726052] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.735374] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.744864] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 6.754372] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Tue Jan 2 01:51:54 2018 user.info kernel: [ 6.764153] procd: - init -
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 8.348804] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Tue Jan 2 01:51:54 2018 kern.notice kernel: [ 8.418030] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
Tue Jan 2 01:51:54 2018 daemon.notice haveged: haveged starting up
Tue Jan 2 01:51:55 2018 daemon.notice procd: /lib/gluon/setup-mode/rc.d/S20network: nl80211 not found.
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: 8021ad
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: 8021q
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: macvlan
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: veth
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: bridge
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: Network device
Tue Jan 2 01:51:56 2018 user.notice : Added device handler type: tunnel
Tue Jan 2 01:51:56 2018 daemon.info haveged: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 5.4.0 CV); collect: 128K
Tue Jan 2 01:51:56 2018 daemon.info haveged: haveged: cpu: (); data: 32K (P); inst: 32K (P); idx: 21/40; sz: 32635/60395
Tue Jan 2 01:51:56 2018 daemon.info haveged: haveged: fills: 0, generated: 0
Tue Jan 2 01:51:57 2018 daemon.info dnsmasq[833]: started, version 2.78 DNS disabled
Tue Jan 2 01:51:57 2018 daemon.info dnsmasq[833]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Tue Jan 2 01:51:57 2018 daemon.info dnsmasq-dhcp[833]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1h
Tue Jan 2 01:51:57 2018 kern.warn kernel: [ 15.483559] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Tue Jan 2 01:51:57 2018 kern.warn kernel: [ 15.527187] jffs2_build_filesystem(): unlocking the mtd device... done.
Tue Jan 2 01:52:01 2018 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Tue Jan 2 01:52:01 2018 kern.warn kernel: [ 15.534028] jffs2_build_filesystem(): erasing all blocks after the end marker...
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.586719] device eth0 entered promiscuous mode
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.622504] IPv6: ADDRCONF(NETDEV_UP): br-setup: link is not ready
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.669421] eth0: link up (1000Mbps/Full duplex)
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.674250] br-setup: port 1(eth0) entered forwarding state
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.680083] br-setup: port 1(eth0) entered forwarding state
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'setup' is enabled
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'setup' is setting up now
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'setup' is now up
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'loopback' is enabled
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'loopback' is now up
Tue Jan 2 01:52:01 2018 daemon.notice netifd: bridge 'br-setup' link is up
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'setup' has link connectivity
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Network device 'eth0' link is up
Tue Jan 2 01:52:01 2018 kern.info kernel: [ 19.763107] IPv6: ADDRCONF(NETDEV_CHANGE): br-setup: link becomes ready
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Network device 'lo' link is up
Tue Jan 2 01:52:01 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Jan 2 01:52:03 2018 kern.info kernel: [ 21.677098] br-setup: port 1(eth0) entered forwarding state
Tue Jan 2 01:52:16 2018 kern.warn kernel: [ 34.141455] done.
Tue Jan 2 01:52:16 2018 kern.notice kernel: [ 34.143479] jffs2: notice: (836) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Jan 2 01:52:16 2018 daemon.info mount_root: performing overlay whiteout
Tue Jan 2 01:52:17 2018 daemon.info procd: - init complete -
Tue Jan 2 01:52:17 2018 authpriv.info dropbear[948]: Not backgrounding
Tue Jan 2 01:52:19 2018 authpriv.info dropbear[949]: Child connection from 192.168.1.2:59604
Tue Jan 2 01:52:19 2018 authpriv.notice dropbear[949]: Auth succeeded with blank password for 'root' from 192.168.1.2:59604
```
## dmesg
```
root@64xxx-f09fc2dcc4c5:~# dmesg
[ 0.000000] Linux version 4.4.93 (hexa@build.ffda.io) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3581+44-6b6578feec) ) #0 Wed Nov 22 00:24:53 2017
[ 0.000000] MyLoader: sysp=1bb19371, boardp=75533157, parts=5317f955
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804344d0, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=UBNT-UF-AC-LITE mtdparts=spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124944K/131072K available (3103K kernel code, 165K rwdata, 780K rodata, 296K init, 205K bss, 6128K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[ 0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[ 0.008206] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.071016] pid_max: default: 32768 minimum: 301
[ 0.076382] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083367] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.106781] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.115299] NET: Registered protocol family 16
[ 0.123484] MIPS: machine is Ubiquiti UniFi-AC-LITE
[ 0.345124] registering PCI controller with io_map_base unset
[ 0.375381] PCI host bridge to bus 0000:00
[ 0.379708] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.386996] pci_bus 0000:00: root bus resource [io 0x0001]
[ 0.392898] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.400061] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.408449] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.408475] pci 0000:00:00.0: invalid calibration data
[ 0.413917] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.413969] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.414031] pci 0000:00:00.0: supports D1
[ 0.414044] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.414549] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.414585] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 0.422305] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[ 0.429952] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.437086] clocksource: Switched to clocksource MIPS
[ 0.445285] NET: Registered protocol family 2
[ 0.451457] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.458855] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.465554] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.472428] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.478618] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.485699] NET: Registered protocol family 1
[ 0.490435] PCI: CLS 0 bytes, default 32
[ 0.502170] Crashlog allocated RAM at address 0x3f00000
[ 0.574361] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.580570] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.602000] io scheduler noop registered
[ 0.606140] io scheduler deadline registered (default)
[ 0.612266] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.626490] console [ttyS0] disabled
[ 0.650352] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.659445] console [ttyS0] enabled
[ 0.666987] bootconsole [early0] disabled
[ 0.689924] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[ 0.695192] 7 cmdlinepart partitions found on MTD device spi0.0
[ 0.701336] Creating 7 MTD partitions on "spi0.0":
[ 0.706293] 0x000000000000-0x000000060000 : "u-boot"
[ 0.715593] 0x000000060000-0x000000070000 : "u-boot-env"
[ 0.724940] 0x000000070000-0x000000800000 : "firmware"
[ 0.747404] 2 uimage-fw partitions found on MTD device firmware
[ 0.753545] 0x000000070000-0x0000001c0000 : "kernel"
[ 0.761858] 0x0000001c0000-0x000000800000 : "rootfs"
[ 0.770947] mtd: device 4 (rootfs) set to be root filesystem
[ 0.776827] 1 squashfs-split partitions found on MTD device rootfs
[ 0.783273] 0x000000480000-0x000000800000 : "rootfs_data"
[ 0.792635] 0x000000800000-0x000000f90000 : "ubnt-airos"
[ 0.801949] 0x000000f90000-0x000000fb0000 : "bs"
[ 0.810482] 0x000000fb0000-0x000000ff0000 : "cfg"
[ 0.819178] 0x000000ff0000-0x000001000000 : "EEPROM"
[ 0.842517] libphy: ag71xx_mdio: probed
[ 1.508629] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Atheros 8031/8033 ethernet]
[ 1.520866] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
[ 1.533053] NET: Registered protocol family 10
[ 1.548229] NET: Registered protocol family 17
[ 1.553561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.566862] 8021q: 802.1Q VLAN Support v1.8
[ 1.593420] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.602422] Freeing unused kernel memory: 296K
[ 2.476816] init: Console is alive
[ 2.480769] init: - watchdog -
[ 2.495092] init: - preinit -
[ 3.462442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.489743] random: procd: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 5.745242] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 5.757845] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 5.936985] procd: - early -
[ 5.941046] procd: - watchdog -
[ 6.622693] procd: - watchdog -
[ 6.626367] procd: - ubus -
[ 6.697351] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.707162] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.716462] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.726052] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.735374] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.744864] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.754372] random: ubusd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[ 6.764153] procd: - init -
[ 8.348804] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 8.418030] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[ 15.483559] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 15.527187] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 15.534028] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 19.586719] device eth0 entered promiscuous mode
[ 19.622504] IPv6: ADDRCONF(NETDEV_UP): br-setup: link is not ready
[ 19.669421] eth0: link up (1000Mbps/Full duplex)
[ 19.674250] br-setup: port 1(eth0) entered forwarding state
[ 19.680083] br-setup: port 1(eth0) entered forwarding state
[ 19.763107] IPv6: ADDRCONF(NETDEV_CHANGE): br-setup: link becomes ready
[ 21.677098] br-setup: port 1(eth0) entered forwarding state
[ 34.141455] done.
[ 34.143479] jffs2: notice: (836) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 77.477138] random: nonblocking pool is initialized
```