WDR4900 - LAN Ports individuell einstellen (WAN Bridge, MoL, FF Client)

Technik
14

So läuft es nun bei mir unter Gluon 2016.2.5.

Die Konfig wurde vollständig manuell erstellt, Mesh on LAN/WAN darf nicht über den Konfig Modus aktiviert worden sein.

cat /etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd98:6d88:a86c::/48'

config interface 'wan6'
        option proto 'dhcpv6'
        option sourcefilter '0'
        option ifname 'br-wan'
        option ip6table '1'
        option peerdns '0'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '0t 5'

config switch_vlan
        option device 'switch0'
        option vlan '2'
        option ports '0t 1 2 3'

config switch_vlan
        option device 'switch0'
        option vlan '3'
        option ports '0t 4'

config interface 'wan'
        option ifname 'eth0.2'
        option multicast_querier '0'
        option peerdns '0'
        option auto '1'
        option type 'bridge'
        option proto 'dhcp'
        option macaddr 'hierstehtnemac'

config rule6 'wan6_lookup'
        option mark '0x01/0x01'
        option lookup '1'

config route6 'wan6_unreachable'
        option type 'unreachable'
        option table '1'
        option target '::/0'
        option metric '65535'
        option gateway '::'
        option interface 'loopback'

config interface 'mesh_wan'
        option ifname 'br-wan'
        option auto '0'
        option transitive '1'
        option fixed_mtu '1'
        option proto 'gluon_mesh'

config interface 'mesh_lan'
        option igmp_snooping '0'
        option transitive '1'
        option fixed_mtu '1'
        option proto 'gluon_mesh'
        option type 'bridge'
        option macaddr 'hierstehtnemac'
        option auto '1'
        option mesh 'bat0'
        option ifname 'eth0.1'

config interface 'mesh_port3'
        option macaddr 'hierstehtnemac'
        option fixed_mtu '1'
        option proto 'gluon_mesh'
        option auto '1'
        option ifname 'eth0.3'

config interface 'client'
        option type 'bridge'
        option macaddr 'hierstehtnemac'
        option proto 'dhcpv6'
        option reqprefix 'no'
        option robustness '3'
        option query_interval '2000'
        option query_response_interval '500'
        option peerdns '1'
        option sourcefilter '0'
        list ifname 'bat0'
        list ifname 'eth0.1'

config interface 'mesh_vpn'
        option ifname 'mesh-vpn'
        option transitive '1'
        option macaddr 'hierstehtnemac'
        option fixed_mtu '1'
        option proto 'gluon_mesh'

config interface 'ibss_radio0'
        option proto 'gluon_mesh'

config interface 'ibss_radio1'
        option proto 'gluon_mesh'

config interface 'bat0'
        option multicast_router '2'
        option ifname 'bat0'
        option macaddr 'hierstehtnemac'
        option learning '0'
        option proto 'none'

config interface 'client_lan'
        option unicast_flood '0'
        option ifname 'eth0.1'

config device 'local_node_dev'
        option macaddr 'hierstehtnemac'
        option ifname 'br-client'
        option name 'local-node'
        option type 'macvlan'

config interface 'local_node'
        option ifname 'local-node'
        option ipaddr '10.116.254.254'
        option ip6addr 'fda1:384a:74de:4242::ffff/128'
        option netmask '255.255.128.0'
        option proto 'static'

config route6 'local_node_route6'
        option target 'fda1:384a:74de:4242::/64'
        option gateway '::'
        option interface 'client'